Government · Salt Lake City & surrounding counties
Municipality Roofing
Roofing for city halls, public works buildings and other municipal facilities.
What municipality roofing involves
Repair, replacement and maintenance on the buildings a city runs, from the offices to the maintenance yard.
A city usually owns several buildings of different ages on different roofs. Knowing all of them lets the work be planned over years instead of in emergencies.
What matters on municipality roofing
Planning around the building
Government buildings stay in use while the roof is worked on. The plan covers where we get onto the roof, where material is staged and how the entrances stay clear, before anything comes off.
A record of the work
Public buildings need a file of what was done. We photograph each stage and record the materials used, so the next person responsible for that roof knows what is up there.
Working with a city
Municipal roofs come in groups: a city hall, a fire station, a public works yard, a park building. Each has its own roof and its own age, and the useful thing is a plain picture of which one needs attention first.
We can walk all of them, photograph what we find and give you a list in order of need, so the roofing budget goes to the roof that is closest to failing.
We work Salt Lake City & surrounding counties, 9 counties in all, with 27 years in the trade and the last 8 as Hancock Signature.
How the system goes together
Bringing an old metal roof back
A metal roof with sound panels and a tired finish is usually a candidate for restoration rather than replacement. Every exposed screw gets pulled and replaced one size up with a fresh washer, the seams and penetrations get reinforced, and then a coating system goes over the whole assembly to seal the thousands of small fastener points at once.
It only works on sound steel
Where the panel has rusted through, or where water has been getting into the insulation below for years, there is nothing for a coating to hold onto and we will say so.
Flat roofs and the membrane choice
Low-slope roofs do not shed, they hold. TPO is a heat-welded white sheet that reflects a lot of the summer load. EPDM is a black rubber sheet that handles cold and movement well. PVC costs more and handles grease and chemicals, which is why it ends up over restaurant kitchens. Modified bitumen comes in rolls torched or adhered in layers, and built-up is the old tar-and-gravel assembly still sitting on plenty of buildings here.
Drainage beats material
Whichever sheet goes down, if the water does not get to a drain within a couple of days, the roof is going to fail early.
What we check
- Field condition and granule loss
- Valleys, ridges and every transition
- Penetrations and their flashing
- Gutter and fascia condition
How we approach it
Look first
We get on the roof and read what is actually happening before quoting anything.
Say what we find
Photographs and a plain explanation, including when the answer is that you do not need us yet.
Built in sequence
Crews we hire and run, working the right detail in the right order.
Leave it clean
Magnet over the yard, container gone, walked with you.
Elevation changes the whole calendar
A roof at the top of a canyon and a roof on the valley floor are on different schedules. Up high the snow arrives in October and is still there in May, the freeze cycles are deeper, and the ultraviolet load in the thin air is harsher year round. Down low there are more melt-and-refreeze swings and fewer feet of standing load.
Same materials, different details
The ice barrier runs further, the ventilation gets sized up, and the fastening schedule tightens as the elevation goes up.
Moss and shade on the north side
Under mature trees on a shaded slope, the north face stays damp long after the rest of the roof has dried. Moss takes hold in that damp, and moss holds water against the mat and lifts shingle edges as it grows under them.
It is a cleaning problem first
Pressure washing an asphalt roof strips the granules and takes years off it. Gentle treatment, then clearing the overhanging limbs that keep the slope wet, is the order it should happen in.
Watch the gutter below
Moss coming off in the gutter is a sign the mat is losing surface too.
What this looks like on a real roof
There is a version of municipality roofing that gets sold off a clipboard in the driveway and a version that comes off actually reading the roof. The second one costs the same and lasts.
What follows is the part most people never get told: what usually went wrong before we arrived, and what the job looks like when it is done in the right order.
Where roofs go wrong
The shortcut we see most
Rooftop units and drains added over the years, with the roof patched around them instead of reworked. Those patches are where most public-building leaks start.
What good looks like instead
Every penetration, curb and drain flashed into the roof system properly, and a record of it in the facility file.
Signs worth a look
- Water still standing days after a storm
- Ceiling-tile stains near rooftop units
- Seams lifting at the edges and parapets
- The same area repaired more than once
What to expect
Before the job starts
A walk of the whole roof, photographs of what we found, and a plain written scope. We talk through access, staging and the building’s schedule before any work is planned.
While the work is underway
The building stays in use. Material is staged where it is out of the way, entrances stay clear, and the loudest work is planned around the schedule we are given.
When it is done
Photographs of each stage and a record of the materials installed, ready for the facility file.
Related work
Government covers more than one job, and they are not interchangeable. These are the others in the same family, each on its own page.
Questions we get asked
Not the question you had? Call the shop and ask a person. We would rather talk it through than have you guess from a website.
(801) 382-8898Can you work while the building is in use?
Usually. We plan access, staging and the loudest work around the building’s schedule before the job starts.
Do you document the work?
Yes. Each stage is photographed and the materials are recorded, so the facility has a file of what was installed.
Can you look at several of our buildings?
Yes. We can inspect them all and give you a list in order of need, so the budget goes to the roof closest to failing.
What makes a Utah roof different?
Snow load, ice at the eaves, canyon wind and high-altitude sun, all on the same roof. A crew that learned roofing somewhere mild has to learn it again up here.
Will you tell me if I do not need a new roof?
Yes. Plenty of what we look at turns out to be a repair, and we say so. A roof with years left in it gets left alone, and you get the photographs either way.
Do you handle the insurance side?
On hail-damaged roofs, we work with your insurance to get the roof covered. We document the damage thoroughly with photographs, so the claim reflects what is actually on the roof.
Talk to Hancock
Ask about municipality roofing
Call (801) 382-8898 or send a note. We will look at the roof and tell you straight what it needs.